Відео

Thanks buddy 😊, I also dodge the "doctors" when I can....my trust in them has been shaken over the years, they don't always get things right. Yep, "the way" isn't going anywhere, we'll be back at it at some point 👍🏻

Haha, thanks Ray, yeah, same here, unless I'm unconscious I'm making my own way off the hill, even if it takes forever lol

@@trooperwolfie I’ve been carried off once. Got claimed by 6 different MRTs on their incident stats. In my defence it did happen during a training exercise hence the 6 team involvement and I did make a good effort at getting down but was stopped by some really bad terrain

Thanks Neil, yeah, she soldiered on like a trooper.

Yeah, it's a real bummer, but we're still determined to do it in the future.

Yeah, we're both gutted, but it is what it is. We will definitely try again.

Haha, I'm not as good at filming and editing as Stripey 😂

Eh up Steve, thanks, unfortunately we've had to bail due to my daughter injuring her ankle. I'll post an update when we get home. But...yes, it is stunning scenery up there! Makes a nice change to the peak district lol.

We were going to do the whole thing back to edale, but my daughter injured her ankle coming down byrness hill on the scramble section, so it might be the end for now. Very disappointing, especially for Ella, she's absolutely gutted. We'll get her ankle checked in Newcastle tomorrow, we're at the hostel in byrness ATM.

@trooperwolfie Poor Ella, so sorry to hear that. I'm sure you guys will be back onto it once she's better. Sending best wishes for a swift recovery mate. 🙏

@@Glossopwildcamp thanks buddy, much appreciated.

Unfortunately, we just about managed to get to byrness... Ella's sprained her ankle. We're staying over in the hostel, and we're going to get the bus to Newcastle in the morning to get it checked. But this might be the end of the road 😔

@@trooperwolfie oh dear 😢

Haha, glad you like em Paul 👍🏻😀

Thanks Neil 😁

Thanks Ray, will do 👍🏻😊

@@trooperwolfie shout out when you get to my neck of the woods, Wessenden Valley/Black hill I’ll come and say hello

@@Voodoo_Ray will do Ray, that would be great 👍🏻

It certainly will be some, apparently pure water draws out the micro plastics easier than contaminated water. It's amazing isn't it...nothing we are told seems to be true...

They only appear to do the standard Durston ones that only cover the floor of the inner, I'm after a full rectangle one that can be pegged out first to get the tent totally rectangular and cover the porch floors, there is a young lady on the internet that makes footprints to order. Thanks for the suggestion though, it's much appreciated. Thanks for watching 👍🏻

I hope it works ok for you, thanks for watching and commenting ☺️

@@trooperwolfie jworked a charm, I did crumble up one tiny bit of the seam where I was a bit over zealous. But apart from that it was all good. Cheers!

Food Definitely tastes far better 👍🏻 I've suffered from a schatzki ring (scar tissue restricting the diameter of my esophagus) caused by acid reflux over the years, as well as taking apple cider vinegar, I stopped consuming seed oils, ever since, I've had hardly any heart burn and my food no longer gets stuck like it used to. I stopped taking pharmaceutical products as well, and I feel much better for it......and real chips have never tasted better lol. Thanks for watching and commenting, much appreciated 😊

Eh up Liam 👍🏻

@@trooperwolfie not sure how I found myself watching these at early hours of the morning 😅 hope you’re good mate

Haha, the algorithm is a strange thing. I've got quite a few customs, in particular, clone troopers from the final season of the bad batch. It's my other hobby for when my anxiety hinders me getting out camping/Hiking. Enjoy 😊

Hi, it was a visaton speaker, I can't remember what model exactly. I'll try dig it out and get back to you on that. It's encased in a styrene box I made myself.

Ahaaa, I found it. It's a Visaton FRS 7 4 ohm speaker, I hope that helps, thanks for watching and commenting 👍🏻

Thanks Buddy, it's certainly a lovely spot, and yes, it's great for the soul, really puts all your problems into perspective. Thanks for watching and commenting 👍🏻

Cheers Steve, it's nice up there, if a little busy. 👍🏻

We'll have to get out camping together soon buddy.

Cheers Rob, thanks for the awesome company 😁👍🏻

Thanks buddy, I'm glad you found it useful, thanks for watching, commenting and subbing, it's much appreciated.

Hello there, my grease proof paper is the same both sides, I've never had a problem with tape sticking. With new seams, it depends on the material, if it's sil-nylon you need to use silicon sealant and brush it on. If it's P.U. coated on the inside you can use new seam tape. I hope this helps. Thanks for watching and commenting 👍🏻

@trooperwolfie well that is a good question it's Hytex SPU-SLDR Nylon (the old tbs micro). I'm lead to believe it is a more polyester thing.

If it feels more than an old balloon I'll have to throw silicon sealant also on the glue of the seams?

@@MrLamphy only if it's sil nylon, if it's pu coated nylon, just use tape 👍🏻

@@MrLamphy test a small piece of tape, if it sticks properly after being ironed on, it's pu coated, if it doesn't stick, it's sil nylon 👍🏻

Thanks buddy, cheers for watching and commenting, it's much appreciated 👍🏻

Cheers buddy.

I don't buddy, nor Facebook, I only use UA-cam, thanks for watching and commenting, it's much appreciated 👍🏻

@@trooperwolfiewith pleasure ! I would like to share to you my custom clones!

@@XxAdRixX69 I'd love to see them, but I'm only on here, I had enough of social media and came off everything 2 years ago apart from here.

@@trooperwolfiedo you have an email?

@@XxAdRixX69 I do, but I don't really want to put it on here to be honest.

Thank you, I'm really happy how they turned out, thanks for watching and commenting, much appreciated 👍🏻

Thanks buddy, yes, it would be nice if Hasbro did more clones like these, it wouldn't be difficult for them. The andor helmet is easily corrected with a wooden tooth pick and some tamiya semi gloss black paint, for some reason the visor print never fills the mould for the visor, and they always forget to paint the bleach rectangle panel on the back. Thanks for watching and commenting 👍🏻

Yeah, apparently all MC Donald's used to use beef tallow until they were pressured into changing to "vegetable" oil. I remember MC Donald's fries being really nice years ago, they're definitely not the same now. Their salt even has 3 ingredients in it now 🤣... surely the only ingredient in salt should be...well...salt?!

Absolutely, we all have much to learn, but we're getting there, stay free buddy 👍🏻

Cheers trooper, yes, I fully agree, I only hope we get a new series based on the clone resistance. Keep an eye out for an upcoming "fireball" video coming soon , thanks again for watching, commenting and subscribing, much appreciated 👍🏻

@@trooperwolfie that’s awesome I love fireball. If you have time I make sw action figure videos too

@@CT-7171 cool, I'll check them out 👍🏻

Cheers trooper, his buddy Fireball will be making an appearance soon when the 3d printed parts arrive from the USA 👍🏻

Thanks 😊, please check out my other custom clones/characters. Thanks for watching and commenting, much appreciated 👍🏻

@@trooperwolfie I absolutely will man your customs are awesome

@@CT-7171 thanks 🙏🏻

Cheers, his helmet is dirty white, as is most of the clones armour, this is a realistic interpretation, in the animation, you can't actually see the individual camo markings either. I painted this by using the graphics of him and samoilovarts version in realistic form The only thing I have got wrong is the spelling of his name lol, it should be Nemec, not Nemek. Thanks for watching and commenting 👍🏻

Thanks buddy 😁, I hand painted him freehand with a paintbrush, I let the paint touch dry then neaten the edges up by scraping excess paint off with a tooth pick. Please take a look at the rest of the clone underground I've made. I've only got fireball to finish and wait for the new rex to ship and I've got them all (with the exception of echo, hunter and wrecker) I'll be doing a cx-2 assassin clone at some point too.

Thanks ! I tried to do my own custom you are an inspiration!🙂✌🏻

@@trooperwolfiewill you make nemec?!😁🙂

@@XxAdRixX69 I've already made him, he's up on my channel 👍🏻

@@trooperwolfiefireball not nemec, my bad😂

Cheers, thanks for watching and commenting, it's highly appreciated 🙂

It's a shame we didn't get to see him in action, thanks for watching and commenting 👍🏻

Thanks 👍🏻, cheers for watching and commenting, much appreciated 🙂

Thanks 😁👍🏻

@@trooperwolfie no problem man can’t wait to see what else you come up with 🔥🔥🔥🔥🔥

Aye...I get your meaning 😉....lots of bad batches 💪🏻💉

I'm glad you found it of value, thanks for watching and commenting 🙂

It makes a huge difference, thanks for watching and commenting 🙂

Hahaha, what bike do you own? I'm an old school scooter boy, I've built many lambretta/Vespa's over the years 👍🏻

Thanks man, I certainly will 👍🏻

I know right they were amazing, i bet it was a pain finding the exact size 😂

​@@spacey1824 yeah, I had to hunt around, the 3mm wide leather straps are from a Chinese dealer on Etsy, I had to cut the rubber braiding bands down by taping the ends to my cutting mat after stretching them a little, and cutting a strip off with a scalpel blade, but I got the desired look in the end lol.

Cheers buddy 😊

I'm definitely making them all, keep an eye on my channel 👍🏻, I've got quite a few custom 3.75" figures on here, please take a look , thanks for watching 👍🏻

Same here, I'm about to watch the finale, I hope we get to see more clone underground troopers.

@@trooperwolfie I’m so excited to watch it, but I’ll have to later. Don’t spoil anything 😉

@@Dice_Roll_Bricks mum's the word 🤫😉